- Introduction
- Specification
- Dimension
- Download
- Order
- Application
- This series of products is an industrial grade GE Genius fieldbus fiber converter, support for GE Genius protocol, the maximum communication rate up to 153.6Kbps, providing single / double light chain network. Ci-GF110 supports one fiber interface and one data bus interface, Ci-GF120 supports two way cascade fiber interface and one data bus interface. Featured with 35mmDIN rail mounting, IP40 metal case (wave grain aluminum reinforce case option), DC (18~36V) dual redundant power input (can be customized with 9~18V DC), relay output alarm, dual redundant power input and isolation protection function. It equipped with -40~75℃ wide temperature range, can meet the requirements of a variety of industrial sites, providing convenient optical fiber communication solutions.
- Bus data interface
* GE Genius Fieldbus SER1, SER2 industrial terminal wiring
* Support for GE Genius Fieldbus protocol
* Baud Rates: 38.4Kbps、76.8Kbps、153.6Kbps(default)
* constant voltage 1000V
* Resistor: without terminal resistor, connect external when necessary.
Optical Interface
* Wave length: multi-mode 850nm、1310 nm; single mode 1310 nm、1550nm
* Fiber type: multi-mode 50/125um、62.5/125um、100/140um;single mode 8.3/125 um、9/125um、10/125um
* Transmission distance: multi-mode 2km, single mode 20km.
* Fiber interface type: ST/SC/FC (optional); ST (standard configuration).
* Single Fiber wavelength: A: Transmit wavelength is single mode 1310nm, then Receive wavelength is 1550nm; B: Transmit wavelength is single mode 1550nm, then Receive wavelength is 1310nm
Power
* DC (18~36V) dual redundant power input (can be customized with 9~18V DC), industrial standard voltage DC 24V, consumption is less than 1.5W, With DC 1500V voltage isolation and reverse connect protection, adopt 5 cores 5.08mm industrial terminal port (please use industrial standard power, otherwise it will occur unit error or damage).
Protection
* Relay: Fiber link fault alarm
* Contact rating: 1A @24V DC, Industrial Terminal port
Mechanical
* Dimensions (H×D×W): 136mm×104.8mm×52.8mm
* Weight:800g
* Casing: IP40 protection, wave grain aluminum reinforce case option
* Installation: Wall mounting or DIN rail mounting
Environmental
* Operating Temperature:-40℃~75℃(-40℃~85℃ optional)
* Storage Temperature: -40℃~85℃
* Ambient Relative Humidity: 5%~95%(non-condensing)
Warranty
* Warranty Period: 5 years