- 产品概述
- 规格参数
- 尺寸外观
- 文档下载
- 订购参数
- 行业应用
- Can/DeviceNet/CANOpen Fieldbus repeater Support Long distance transmission, various connectors, flexible Networking, stable performance, Anti-battery interference etc functions, suitable to the use of Power systems, Traffic, Energy monitoring etc industrial control field. Support Can2.0 A/B protocol CAN, DeviceNet, CANOpen, SDS, NMEA2000, SAEJ1939, SAE J2284 etc standards, And, Ci-AF series is the product based on CAN standard, can be compatible different kinds of Fieldbus, band rate can be set by the DIP switch, support 32 common rate. Ci-DF/OF Series is for the DeviceNet, CanOpen , support the all band rate required by the standard, can be set by DIP switch or auto negotiation. This series support 1~2 fieldbus ports and 1~2 Fiber ports, can deploy the ports according to the needs. Support redundant dual fieldbus structure and Ring fiber function, support point to point, Daisy chain, star topology, Redundancy optical fiber ring network topology and mixed networking. The product is Industrial grad designed, Casing: IP40 protection, wave grain aluminum reinforce case option, DIN rail mounting, DC (9~36v) power input, support optical fiber link failure and bus error alarm output, dual redundant power input and isolation protection. -40~75℃Operating Temperature, can meet various Industrial situation.
- Bus data interface
* 1~2 5PIN industrial terminal, conform to CiA&ODVA protocol standard
* Support CAN/DeviceNet/CANOpen bus standard
* Baud Rates:DeviceNet/CANOpen all rate level, up to 1Mbps
* Have the protection function of 4000V anti-lightning
* The unit has 120 ohms, use corresponding switch to make it to be enable(default disable)
Optical Interface
* Wave length: multi-mode 850nm、1310 nm; single mode 1310 nm、1550nm
* Fiber type: multi-mode 50/125um、62.5/125um、100/140um;single mode 8.3/125 um、9/125um、10/125um
* Transmission distance: multi-mode 2km, single mode 20km.
* Fiber interface type: ST/SC/FC (optional); ST (standard configuration).
* Single Fiber wavelength: A: Transmit wavelength is single mode 1310nm, then Receive wavelength is 1550nm; B: Transmit wavelength is single mode 1550nm, then Receive wavelength is 1310nm
* The optical line BER: <10-9
* Signal Delay (optical interface): ≤2.3μs/node
Power
* DC (9~36V) dual redundant power input, industrial standard voltage DC 24V, consumption is less than 4W, With DC 1500V voltage isolation and reverse connect protection, adopt 5 cores 5.08mm industrial terminal port (please use industrial standard power, otherwise it will occur unit error or damage).
Protection
* Relay: optical fiber link failure and bus error alarm output
* Contact rating: 1A @24V DC, Industrial Terminal port
Mechanical
* Dimensions (H×D×W): 136mm×104.8mm×52.8mm
* Weight:800g
* Casing: IP40 protection, wave grain aluminum reinforce case option
* Installation: Wall mounting or DIN rail mounting
Environmental
* Operating Temperature:-40℃~75℃(-40℃~85℃ optional)
* Storage Temperature: -40℃~85℃
* Ambient Relative Humidity: 5%~95%(non-condensing)
Warranty
* Warranty Period: 5 years
