- Introduction
- Specification
- Dimension
- Download
- Order
- Application
- This product is an industrial RS-485 bus isolator, provide RS-485 serial port, support Modbus/MPI/PPI and other buses, communication rate 0~2Mbps Adaptive, 2-channel bus interface data forwarding, electrical signal isolation and cable system to provide a star link.This product features with industrial grade design, IP40 protection grade, wavy aluminum strengthening shell, 35mmDIN rail installation, DC (18~36V) wide power input (9~18V DC power model customizable), with relay alarm output, power supply redundancy and isolation protection etc.. -40~75 working temperature range, can meet the requirements of a variety of industrial sites.
- Bus data interface
* DB9F interface
* Support
for Modbus/MPI/PPI etc many Fieldbus based on RS-485 protocol
* RS-485
support A, B half-duplex mode , baudrate:0~2Mbps
* constant voltage
1000V
* Resistor:
without terminal resistor, connect external when necessary.
Power
* DC (18~36V) dual redundant power input (can be customized with 9~18V DC), industrial standard voltage DC 24V, consumption is less than 4W, With DC 1500V voltage isolation and reverse connect protection, adopt 5 cores 5.08mm industrial terminal port (please use industrial standard power, otherwise it will occur unit error or damage).
Protection
* Relay: Fieldbus ports error Relay alarm output
* Contact rating: 1A @24V DC, Industrial Terminal port
Mechanical
* Dimensions (H×D×W): 136mm×104.8mm×52.8mm
* Weight:800g
* Casing: IP40 protection, wave grain aluminum reinforce case option
* Installation: Wall mounting or DIN rail mounting
Environmental
* Operating Temperature:-40℃~75℃
* Storage Temperature: -40℃~85℃
* Ambient Relative Humidity: 5%~95%(non-condensing)
Warranty
* Warranty Period: 5 years
Certification
* IEC61000-4-2(ESD): Power ±4KV Contact, ±15KV Air; Relay ±6KV Contact, ±15KV Air; Data Cable ±15KV Air
* IEC61000-4-4(EFT):Power ±500V, Data Cable ±500V
* IEC61000-4-5(Surge):Power ±2KV CM/ ±1KV DM, Relay±2KV CM/ ±1KV DM
* IEC60068-2-27(Shock)
* IEC60068-2-32(Free Fall)
* IEC61000-6-2(General Industrial Standard)
* EN50121-4 (rail transit)
