Chinese Pages
Products
MG5x44 Series |4-channel RS-485 Serial Gateway
1/10
Pre
Next
MG5x44 Series
Series Description: 4-channel RS-485 Serial Gateway

* 4*10/100BASE-T(X) RJ45 ports;
* 4*RS-485 ports;
* 0~2*100Base optical port;
* Support 4 serial isolation function, isolated voltage 500V AC;
* Conforms to TCP, IP, UDP, ModbusTCP, ModbusRTU, ARP, ICMP, HTTP, and TFTP client protocols;
* Supports Modbus Slave mode, the maximum support of 16 TCP master connections in Slave mode;
* High strength IP40 shell and industrial-grade EMC design;
* Support 12~48VDC power input;
* Support DIN-Rail Mounting and Wall Mounting supported;
* Operating temperature range: -40~85℃, suitable for industrial environment applications.

  • Introduction
  • Specification
  • Dimension
  • Download
  • Order
  • Application
         The 4-channel RS-485 serial gateway adopts high-strength IP40 protective casing, industrial-grade EMC design, support Auto-Negotiation Adaptive Technology, provide a comprehensive LED status indicator, support voltage 12~48V DC power input to increase the reliability of the communication network. Provide 4*10/100Base-T (x) RJ45 port , 4-channel RS-485 serial port and 0~2*100Base optical port,  can disperse the serial equipment, the host and so on through the network simple, convenient centralized management, the communication rate support 110~115200bps optional. Built-in ModbusTCP and ModbusRTU protocol, the user can easily realize Modbus Ethernet device and Modbus serial device connection. Based on industrial installation requirements, the installation mode of DIN35 guideway is provided. This product adopts the industry's excellent network program, -40~85℃ working temperature range, can satisfy all kinds of industrial site requirements, provide convenient serial port communication solutions.


    *   4*10/100BASE-T(X) RJ45 ports;
    *   4*RS-485 ports;
    *   0~2*100Base optical port;
    *   Support 4 serial isolation function, isolated voltage 500V AC;
    *   Conforms to TCP, IP, UDP, ModbusTCP, ModbusRTU, ARP, ICMP, HTTP, and TFTP client protocols;
    *   Supports Modbus Slave mode, the maximum support of 4 TCP master connections in Slave mode;
    *   High strength IP40 shell and industrial-grade EMC design;
    *   Support 12~48VDC power input;
    *   Support DIN-Rail Mounting and Wall Mounting supported;
    *   Operating temperature range: -40~85℃, suitable for industrial environment applications.
    Technical Standard
    *    Protocol: IEEE802.3、IEEE802.3u

    Interfaces
    *    RJ45 port: 10/100BASE-T(X) auto-Negotiation speed, auto duplex mode and MDI/MDI-X connection;
    *    Optical port: 100Base-FX full duplex, SC interface by default, optional FC, ST, furthest to travel 120 km; single fiber wavelength: wavelength for A machine to send single-mode 1310nm, receive send wavelength of single mode 1550nm wavelength of 1550nm,B machines and receiving wavelength of 1310nm;
    *    Serial port:RS-485 supports A and B half-duplex working mode; communication rate support 110~115200bps optional, isolated voltage 500V AC; Built-in ModbusTCP and ModbusRTU protocol, support Modbus Slave mode, Slave mode to maximize the support of 4 TCP master Connection; communication rate supports 300~115200bps optional.

    Exchange Property
    *    Ten trillion forwarding speed:14881pps;
    *    Fast forwarding speed:148810pps;
    *    Transmission way:store-and-forward;
    *    Switching bandwidth:1.2Gbps;
    *    Buffer memory size:1Mbits;
    *    MAC address table:1K.

    Serial Port Attribute
    *    Standard: RS-485;
    *    RS-485 signal: D+, D-, GND;
    *    Check digit: None, Even, ODD;
    *    Data bits: 5bit, 6bit, 7bit, 8bit;
    *    Stop bit: 1bit, 2bit;
    *    Baud rate: 110~115200bps;
    *    Directional control: RS-485 adopts data flow control technology;
    *    Load capacity: RS-485 side supports 32 point polling environment (customizable 128 points);
    *    Interface form: RS-485 and adopts 5-bit 5.08mm spacing terminal;
    *    Interface protection: 4000V surge protection.

    Indicator
    *    Power indicator: PWR;
    *    System running indicator: SYS;
    *    Fiber indicator: FX;
    *    Serial port data status indicator: COM.

    Power Supply
    *    Input: Wide DC power input 12~48VDC (12V/24V/48V typical) with 4-bit 7.62mm industrial power terminal;
    *    No-load Consumption:< 3.12W (@24VDC) ;
    *    Full-load Consumption:< 3.84W (@24VDC) .

    Mechine
    *    Dimension(W×H×D): 60.2mm×138.5mm×109mm;
    *    Net weight: 600g;
    *    Housing: Metal, IP40 protection;
    *    Installation: Wall mounting or DIN rail mounting.

    Environment
    *    Working temperature:-40℃~85℃;
    *    Storage temperature: -40℃~ 85℃;
    *    Relative humidity: 5% ~ 95% (no condensing) .

    Warranty:
    *    5 years.

    Certificates:
    *    IEC61000-4-2(ESD):±8KV Contact, ±15KV Air
    *    IEC61000-4-3(RS):10V/M(80-1000MHZ)
    *    IEC61000-4-4(EFT):Power ±4KV, Data Cable ±4KV
    *    IEC61000-4-5(Surge):Power ±4KV CM/ ±2KV DM, Data Cable±4KV
    *    IEC61000-4-6(CS):3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ)
    *    IEC61000-4-16(MS):30V COUNT 300V, 1S
    *    IEC60068-2-6(Vibration)
    *    IEC60068-2-27(Shock)
    *    IEC60068-2-32(Free Fall)
    *    IEC61000-6-2(General Industrial Standard)

    Package List
    *    4-channel RS-485 Serial Gateway
    *    Product Manual
    *    Product Warranty

    SelectProduct ModelDescribe
    MG51444-channel RS-485 serial port gateway,4*10/100Base-T(X) RJ45 port,1*100Base optical port,4-channel RS-485/422 serial port, -40℃~85℃.
    MG52444-channel RS-485 serial port gateway,4*10/100Base-T(X) RJ45 port,2*100Base optical port, 4-channel RS-485/422 serial port,-40℃~85℃.
    MG50444-channel RS-485 serial port gateway,4*10/100Base-T(X) RJ45 port,4-channel RS-485/422 serial port, -40℃~85℃.
    
    Service Hotline:
    +86-400-863-2699Contact Us
    Home|Industrial Ethernet|Field Bus|Solutions|Supports|News|About Us|Contact Us

    Shenzhen Comark Technology Co. Ltd.

    Tel: +86 13924583493
    Email:sales01@comark.cn
    Add: Floor 4, Building G, No. 2 Tangxi Industrial Zone,21# Xijing Rd,Gu Shu, Xi Xiang, Bao'An District, Shenzhen, 518126, P.R.C.
    Follow Us