- Introduction
- Specification
- Dimension
- Download
- Order
- Application
- The 4-channel RS-485 serial server adopts high-strength IP40 protective casing, industrial-grade EMC design, support Auto-Negotiation Adaptive Technology, provide a comprehensive LED status indicator, support voltage 12~48V DC power input to increase the reliability of the communication network. Provide 4*10/100Base-T (x) RJ45 port ,4-channel RS-485 serial port and 0~2*100Base optical port, can disperse the serial equipment, the host and so on through the network simple, convenient centralized management, the communication rate support 110~115200bps optional. Based on industrial installation requirements, the installation mode of DIN35 guideway is provided. This product adopts the industry's excellent network program, -40~85℃ working temperature range, can satisfy all kinds of industrial site requirements, provide convenient serial port communication solutions.
* 4*10/100BASE-T(X) RJ45 ports;
* 4*RS-485 ports;
* 0~2*100Base optical port;
* Support 4 serial isolation function, isolated voltage 500V AC;
* Serial port communicate on Ethernet, support TCP Server, TCP Client, UDP mode;
* High strength IP40 shell and industrial-grade EMC design;
* Support 12~48VDC power input;
* Support DIN-Rail Mounting and Wall Mounting supported;
* Operating temperature range: -40~85℃, suitable for industrial environment applications.
- Technical Standard
* Protocol: IEEE802.3、IEEE802.3u
Interfaces
* RJ45 port: 10/100BASE-T(X) auto-Negotiation speed, auto duplex mode and MDI/MDI-X connection;
* Optical port: 100Base-FX full duplex, SC interface by default, optional FC, ST, furthest to travel 120 km; single fiber wavelength: wavelength for A machine to send single-mode 1310nm, receive send wavelength of single mode 1550nm wavelength of 1550nm,B machines and receiving wavelength of 1310nm;
* Serial port: RS-485 supports A and B half-duplex working mode,communication rate support 110~115200bps optional, isolated voltage 500V AC.
Exchange Property
* Ten trillion forwarding speed:14881pps;
* Fast forwarding speed:148810pps;
* Transmission way:store-and-forward;
* Switching bandwidth:1.2Gbps;
* Buffer memory size:1Mbits;
* MAC address table:1K.
Serial Port Attribute
* Standard: RS-485;
* RS-485 signal: D+, D-, GND;
* Check digit: None, Even, ODD;
* Data bits: 5bit, 6bit, 7bit, 8bit;
* Stop bit: 1bit, 2bit;
* Baud rate: 110~115200bps;
* Directional control: RS-485 adopts data flow control technology;
* Load capacity: RS-485 side supports 32 point polling environment (customizable 128 points);
* Interface form: RS-485 and adopts 5-bit 5.08mm spacing terminal;
* Interface protection: 4000Vsurge protection.
Indicator Lamp
* Power indicator: PWR;
* System running indicator: SYS;
* Fiber indicator: FX;
* Serial port data status indicator: COM.
Power Supply
* Input: Wide DC power input 12~48VDC (12V/24V/48V typical) with 4-bit 7.62mm industrial power terminal;
* No-load Consumption：< 3.12W (@24VDC) ;
* Full-load Consumption：< 3.84W (@24VDC) .
Mechine
* Dimension(W×H×D): 60.2mm×138.5mm×109mm;
* Net weight: 600g;
* Housing: Metal, IP40 protection;
* Installation: Wall mounting or DIN rail mounting.
Operating Environment
* Working temperature:-40℃~85℃;
* Storage temperature: -40℃~ 85℃;
* Relative humidity: 5% ~ 95% (no condensing) .
Warranty
* 5 years
Standards
* IEC61000-4-2(ESD)：±8KV Contact, ±15KV Air
* IEC61000-4-3(RS)：10V/M(80-1000MHZ)
* IEC61000-4-4(EFT)：Power ±4KV, Data Cable ±4KV
* IEC61000-4-5(Surge)：Power ±4KV CM/ ±2KV DM, Data Cable±4KV
* IEC61000-4-6(CS)：3V (10KHZ-150KHZ), 10V (150KHZ-80MHZ)
* IEC61000-4-16(MS)：30V COUNT 300V, 1S
* IEC60068-2-6(Vibration)
* IEC60068-2-27(Shock)
* IEC60068-2-32(Free Fall)
* IEC61000-6-2(General Industrial Standard)
